Be the first to get the latest news and save €10 on your first order.
Thank you for subscribing.
Subscribe to get your coupon
Wrap a flexible tape measure around the largest portion of your head about 1/2” or 1.25 cm above the top of your ear. Pro Tip:You can use a string if you do not have a flexible tape measure, then measure the string with a tape measure or ruler. Once you've measured yourself, check our sizing chart to find your size.
How to adjust the fit system
Some helmets come equipped with a fit system. This system allows for the helmet to fit more comfortably and securely on the head while riding.Fit systems do not affect the helmet’s ability to stay on in an accident.Only the above retention system does that.
These fit systems are usually identified as a dial-like system on the very rear of the helmet. Many of these dial systems can be adjusted up or down on the inside of the helmet for better comfort. They can also sometimes be adjusted forward and backward for better comfort as well. Check the inside of the helmet for adjustment notches and, if available, try out different fit system configurations to find the most comfortable fit.
Never adjust the snap-in pins to a location that is not designed specifically for receiving the adjustment pins. By activating the dial clockwise or counter-clockwise, the helmet’s fit system can contract or expand to better fit the user. Some dials may need to be pressed inward prior to rotation in order to be properly activated.
How to adjust the straps
1.First, position the helmet on your head so that the lowest front edge is about 1.5 inches or 3.8 cm's above your eyebrow. Your helmet should not be tilted back on your head (figure 1). When the helmet is properly positioned on your head, both the front and the rear straps should be evenly tensioned, with the strap guides positioned just below the ears (figure 2). If the straps are uneven, they can be adjusted by pulling them through the rear of the helmet.
2.To adjust the length of the straps, use the strap guides to make the adjustments up or down so that the strap guide is positioned just below the ear. Any slack in the strap must be pulled through the chin buckle. The loose ends of the strap must then be passed at least a half inch through the rubber "O" ring. The straps should not cover your ears.
3.Next, close the chin buckle and tighten the combined straps until they are comfortable underneath your chin, and as far back towards the throat as is comfortable. Position the buckle so that it is centered side to side. To see if your straps are correctly adjusted, try to pull the helmet off from both the front and the back. If it can be tipped forward, tighten the back straps. If it can be tipped backward, tighten the front straps.
If the helmet does not fit properly after adjustment, do not use the helmet! Choose another size and/or model of helmet that fits and which can be properly adjusted.
100% secure payments
CONSTRUCTION & FEATURES
From the peloton to the bike path, the dynamic, sleek, and comfortable Volata road bike helmet pushes you to excel with confidence—and a smile. Known as the “final sprint” throughout Italian cycling, the Volata enhances your riding experience, helping you find your zone, whether you’re cranking for fitness, commuting, or on your next club ride or century tour. With its aerodynamic design, adjustable micro-fit system, and 17 cooling vents, the homestretch is always in sight.
+ LEM Tech Integrated™ EPS in-mold technology
+ 17 cooling vents for maximum comfort control
+ LEM FS2TM Padded Occipital Lobe 5 position height adjustment fit system for custom-fit feel
+ Lightweight, aerodynamic design
+ Fit System: FS2-5
+ Number of Vents: 17
+ Webbing: Polyester Reflective
+ Visor: No
+ Padding: LEM-Tech
+ Reflector: Yes
Sizes: Small 53-56cm, Medium 56-59cm, Large 59-62cm Weight: 255g Certification: CE EN1078
All helmets can be adjusted to a certain degree but not all helmets can give you a custom-fit feel, especially at this price point. The LEM FS2TM adjustment system has been designed so you can adjust the height of the retention cradle so it fits the back of your head, however it is shaped. There are five points of adjustment meaning everyone will find a comfortable fit. It’s also padded at the crucial points so it sits lightly with no digging in. A comfortable fitting helmet is not only safer but is the one you hardly notice wearing, even on the longest rides.
EPS in-mold technology is by far the best way to reduce the weight and volume of a helmet. Instead of a hard shell being stuck on top of the EPS foam, the integrated method means the shell and liner are formed in one mold together. Safety is uncompromised but a smaller, lighter helmet is much more pleasant to wear. It also means the venting system can be improved so the helmet is more comfortable in all weathers and all temperatures. A lighter helmet is also easier on the neck. The EPS in-mold technology is therefore the sound basis for all the design that will make you reach for this helmet for all your riding.