Be the first to get the latest news and save €10 on your first order.
Thank you for subscribing.
Subscribe to get your coupon
Wrap a flexible tape measure around the largest portion of your head about 1/2” or 1.25 cm above the top of your ear. Pro Tip:You can use a string if you do not have a flexible tape measure, then measure the string with a tape measure or ruler. Once you've measured yourself, check our sizing chart to find your size.
How to adjust the fit system
Some helmets come equipped with a fit system. This system allows for the helmet to fit more comfortably and securely on the head while riding.Fit systems do not affect the helmet’s ability to stay on in an accident.Only the above retention system does that.
These fit systems are usually identified as a dial-like system on the very rear of the helmet. Many of these dial systems can be adjusted up or down on the inside of the helmet for better comfort. They can also sometimes be adjusted forward and backward for better comfort as well. Check the inside of the helmet for adjustment notches and, if available, try out different fit system configurations to find the most comfortable fit.
Never adjust the snap-in pins to a location that is not designed specifically for receiving the adjustment pins. By activating the dial clockwise or counter-clockwise, the helmet’s fit system can contract or expand to better fit the user. Some dials may need to be pressed inward prior to rotation in order to be properly activated.
How to adjust the straps
1.First, position the helmet on your head so that the lowest front edge is about 1.5 inches or 3.8 cm's above your eyebrow. Your helmet should not be tilted back on your head (figure 1). When the helmet is properly positioned on your head, both the front and the rear straps should be evenly tensioned, with the strap guides positioned just below the ears (figure 2). If the straps are uneven, they can be adjusted by pulling them through the rear of the helmet.
2.To adjust the length of the straps, use the strap guides to make the adjustments up or down so that the strap guide is positioned just below the ear. Any slack in the strap must be pulled through the chin buckle. The loose ends of the strap must then be passed at least a half inch through the rubber "O" ring. The straps should not cover your ears.
3.Next, close the chin buckle and tighten the combined straps until they are comfortable underneath your chin, and as far back towards the throat as is comfortable. Position the buckle so that it is centered side to side. To see if your straps are correctly adjusted, try to pull the helmet off from both the front and the back. If it can be tipped forward, tighten the back straps. If it can be tipped backward, tighten the front straps.
If the helmet does not fit properly after adjustment, do not use the helmet! Choose another size and/or model of helmet that fits and which can be properly adjusted.
100% secure payments
CONSTRUCTION & FEATURES
The Tailwind road bike helmet leads, it doesn’t draft. Well, once in a while is acceptable. Made for all-day road rides, Tuesday night post-work spins with friends, or family bike tours, the Tailwind helmet brings together a lightweight, ride-ready design with aerodynamic comfort and style. Built for the road cyclist, the Tailwind hits the sweet spot between weekend warrior and competitor, creating experiences that make you want to ride more.
+ LEM Flow-Thru™ ventilation system offers large intake and exhaust vents to keep you cool
+ Proprietary GelMotion® technology for enhanced management of high- and low-energy impacts, and rotational and oblique impacts
+ LEM Tech Integrated™ 4 PC shell and EPS in-mold technology
+ 19 vents for max airflow and temperature control
+ Fit System: FS2
+ Webbing: Polyester Reflective
+ Padding: LEM-Tech w/ Bug Mesh
+ Reflector: Yes
Sizes: Small 53-56cm, Medium 56-59cm, Large 59-62cm Weight: 270g Certification: CE EN1078
+ LEM Tech Integrated 4 PC shell and EPS in-mold technology
For the Tailwind we’ve taken the in-mold technology and pushed it that little bit further. The helmet shell isn’t just one piece but four separate pieces jigsawed together. This gives much greater manufacturing flexibility so the design can be pushed further. For the rider that means a better fit so it’s more comfortable to wear for longer rides, and there’s better venting to keep your cooler for longer. It all adds up to a helmet that can be worn any time for as long as you care to make your ride. It makes construction trickier too, but that’s our problem not yours.
Summer riding is fantastic. Miles of open road, spinning along in the sunshine, meeting friends for a café stop… which is when you realise your head is covered in all of the insects you’ve ridden through in the last 50 km. Vents are great at keeping your head much cooler while riding but they can let the unwanted visitors in. Enter the BugOut liner - positioned behind the front vents to keep the bugs where they belong. No more spending your café stops picking things out of your hair or wiping your head.